For stuffed-toy manufacturers
Evaluate glow plush inside your own toy process.
Luminous Fabrics supplies photoluminescent plush fabric to stuffed-toy manufacturers. Classic Glow Plush is available for sampling, prototyping and technical evaluation. Cut-and-sew compatibility is PENDING EVALUATION on your line — not a universal manufacturing claim.
Shenzhen TopTrend Home Textiles Co., Ltd. · Shenzhen mill · not a toy shop.
Who it is for
- Stuffed-toy factories
- Plush OEM / ODM manufacturers
- Toy product developers
- Sourcing teams
- Brand product teams working with toy factories
Existing toy development
For your current process
Status is evidence-led. PENDING means the mill has not published a factory-line specification for that step. Mill photography of sewn samples is not an equipment claim.
Material sample
VERIFIED
Classic Glow Plush can be requested through the sample funnel.
Factory evaluation
PENDING EVALUATION
Cut, sew, embroider/print and stuff on your line. Not published as an equipment specification.
Prototype
PENDING EVALUATION
Afterglow, seams and fill are judged on a stuffed mock-up, not a flat mill card.
Finished-toy testing
PROJECT-SPECIFIC
ASTM F963 / EN71 apply to the toy you sell. Material-level reports are not a toy certificate.
Production review
PENDING EVALUATION
Bulk follows sample evaluation. Classic Glow Plush lead time is unpublished.
What you can evaluate
- CuttingPENDING
- SewingPENDING
- EmbroideryPENDING
- PrintingPENDING
- StuffingPENDING
- Prototype afterglowPENDING
- CareUNKNOWN
- Finished-toy compliancePENDING
Test before production
- Material handling and hand-feel in daylight
- Cut and sew on your existing plush line
- Glow on a stuffed mock-up, not only a flat card
- Care method you actually use
- Finished-toy compliance for the target market (project-specific)
- Packaging and labeling claims you will print
Evidence
What we can show a factory buyer
Reports describe the samples named on them. They are not a blanket certificate for Classic Glow Plush or for every stuffed toy. Finished-toy ASTM F963 / EN71 testing stays project-specific.
SGS
EN71-3 luminous plush fabric
Material-level fabric report. Confirm whether the tested construction is the SKU you will cut. Not a finished-toy certificate.
TSZH240902327C · 2024-12-11
SGS
ASTM F963 / CPSIA toy safety
Finished-toy SKUs on the report. Not a blanket mill certificate for Classic Glow Plush.
SHHL2009544359TY · 2020-09-27
BACL
EN71 / REACH / ASTM F963 suite
Finished-product test suite. Market and construction must be re-confirmed per project.
RSZ191226A8555E · 2020-01-07
Radiation screening
Luminous fabric X/γ dose rate
Material-level luminous fabric sample. Not a finished-toy certificate.
FS2014-0054-001A · 2014-06-17
Evidence register
Available evidence is material-level. Finished-toy compliance remains project-specific. Scope verification required. Documents are not public downloads.
| Evidence / document | Status | Scope | Buyer action |
|---|---|---|---|
| Radiation screening | VERIFIED | Report FS2014-0054-001A (2014-06-17) on a luminous fabric sample vs GB 18871-2002. Material-level. | Request compliance pack |
| ASTM F963-related evidence | VERIFIED | SGS SHHL2009544359TY (2020-09-27) on named Little Room finished glow toys. Not a blanket mill certificate. | Request compliance pack |
| EN71-related evidence | VERIFIED | BACL RSZ191226A8555E (2020-01-07) includes EN71-1/2/3 Pass on the tested items. Scope verification required. | Request compliance pack |
| REACH-related evidence | VERIFIED | Inspection material type listed in the mill introduction. Reviewed per material and market. | Request compliance pack |
| EN71-3-related evidence | VERIFIED | SGS TSZH240902327C (2024-12-11) on a luminous plush fabric sample, EN71-3:2019+A1:2021 符合. Confirm construction coverage. | Request compliance pack |
| Material specification (GSM, width, pile, composition) | UNKNOWN | Not published for Classic Glow Plush. | Request technical pack / sample |
| Glow test (measured protocol) | PENDING | No SKU-specific illuminance protocol is published. Mill typicals are company description only. | Evaluate on a stuffed prototype |
| Care guidance | UNKNOWN | The introduction states the material can be cleaned and reused. Cycle count is unpublished. | Test your care method on a sample |
Factory questions
- Can this fabric be used for stuffed animals?
- Yes — stuffed toys are a listed application for Classic Glow Plush. Suitability is confirmed by sampling on your SKU. A glowing textile does not certify the finished toy.
- Does it require batteries?
- No. The pile is photoluminescent: it stores visible light and emits an afterglow in the dark. It is not an LED insert and not a battery product.
- Can it be sewn on standard plush-toy equipment?
- Line compatibility is PENDING. Mill application samples are sewn plush, but Classic Glow Plush is not published as an equipment specification. Evaluate cut-and-sew on a factory sample.
- Can it be embroidered or printed?
- Embroidery and printing compatibility are PENDING for Classic Glow Plush. Do not assume either process from catalog photography.
- What should we test before mass production?
- Hand-feel, cut, sew, stuff, afterglow on the stuffed toy, care method, and finished-toy compliance for the destination market. Request a fabric sample first.
- What evidence is available?
- The mill introduction pack includes radiation screening, ASTM F963, EN71, REACH, and SGS EN71-3 report TSZH240902327C (11 December 2024). These are available for review per material and market — not as public blanket certificates.
Next step
Request Classic Glow Plush, evaluate it on a stuffed mock-up, then discuss bulk. Pet and home-textile uses stay on Applications.